I am fairly new to Mini-Z Racing and use a MR-15 HM Yaris in stock setup.
Driving this little car is very much fun and the battles for the best position are great.
But I have a few questions that I think will mostly fit in here (Motor Tech). If not plse move my thread.
1. I don't want to solder fets on my board as I am retty sure that I will BURN it. What kind of motor do you recommend ?
2. Is there a motor comparison chart out there where I can see motor specs ?
I miss the data for the stock mini-z motor (i.e. rev/power/winds)
3. If I switch to a 2.4GHz board i can use the Kopropo cable to program my speed controller ? (PC, cable and software req.)
4. Does it make any difference if I use a EX-I UR (with the Mini-Z 2.4GHz) or the Kyosho 2.4 GHz tx ?
Do I need anything else ? (cable, adapter ?) I thought I only need to connect the pc to the board (car) regardless of what tx is used.
The MZ-9 is a FC-130 Mabuchi. The case looks like it is polished to remove the brand. But I am 100% sure its the Mabuchi I mentioned above.
Whats still a riddle to me is the ICS Adapter. Perhaps I am just too cautious. Does it matter what kind of TX I use ? Or will it always work ? Or should I ask this at the 2.4GhZ ASF section ?
Thank you much
Gadu
Last edited by Gadu; 2008.12.04 at 11:21 AM.
Reason: typo
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»